Hi Guys,

Do any of you who have built or rebuilt 4A-GE engines know of decent suppliers for parts such as main bearings, big end bearings, gaskets, pistons, rings etc. I have seen a few bits and bobs on ebay but am looking for a single source of supply to hopefully try and blag some sort of bulk discount. I know BPJ services do most of the stuff, does anyone know of anywhere else that is competitively priced?

Cheers Guys

Adam

Theres a company called Fensport - www.fensport.com

They mainly supply parts and engines for Toyota performance production models but they have a kit car section on their website and have parts for the 4A-GE

RAW engineering made their name with the 4age. Don't know how cheap they are (suspect not)

Hi Adam,

You could try Blueprint Parts

http://www.blueprint-adl.co.uk/newweb/index4.asp

Not sure what they are like but i know they do all the bits. They seem to be distributed via most large motor factors.

HTH

Cheers

Gary

4 AGE big ends!!!
Had to replace mine earlier this year but just used the engineering co. that polished my crank,wasn't cheap but did it more for conveniance at the time.
I know that by the time I had a polish,big ends,mains and thrusts,plus front and rear crank seals and gaskets from Toyota it came to almost £200.
That was an expensive track day,all I'm going to say about the cause is that I dont use the same sump anymore

[Edited on 11/11/05 by DEAN C.]