Board logo

Which Donor Car/ engine can I use?
Chris Bellamy - 20/11/05 at 11:57 AM

I had an old ford escort (but a MK 3) which I was going to use as a donor car, only trouble is that it is front wheel drive.
Can somebody help me by giving a list of compatible donor cars/ engines which will work with the project and i can keep my eyes out for. Obviously I can still use some things from the donor escort, i just need an engine. Any Ideas? A simple list of compatable things would be nice!
Many Thanks
Chris


theconrodkid - 20/11/05 at 12:11 PM

depends on what you are building,if its a 7 type then a seirra is the most common doner,mounting a CVH engine isnt easy,a lot of peeps go bike power these days as well


Chris Bellamy - 20/11/05 at 12:16 PM

I will be doing the standard thing, from the book, nothing special, is a sierra the thing to look for? From reading other posts is the 2.0 ltr Pinto engine what im looking for?


flak monkey - 20/11/05 at 01:26 PM

Go to my site, and from the donors section and the FAQ you should get all the info you need.

I am just too lazy to type it all out here

David

PS welcome to the site


Chris Bellamy - 20/11/05 at 02:14 PM

Okay, the sierra looks like the best bet. Are there serious modifications needed or are they all pretty obvoius? How much do things need adjusting


big_wasa - 20/11/05 at 03:05 PM

Are you scratch building or buying a kit ?
Either way I wouldnt bother with a donor ,just pick up the bits as you need them.

Plenty of unfinished projects get broken and its still possible to do a full book build if your prepared to travell.

As said lots of engines available today you may find a donor not worth the time or hassle.

Ive noticed the price of old sierras going up in price.

Just my 2p worth


Chris Bellamy - 20/11/05 at 03:45 PM

Surely buying separate parts is going to be expensive?


Chris Bellamy - 20/11/05 at 04:28 PM

Also do hub assemblies have to come from a cortina, or are the other alertnatives?


theconrodkid - 20/11/05 at 06:51 PM

prob is tina parts are very rare these days,seirra ones can be used but geometry is different and bones will need to different,best thong is to get to see/have a ride in one,get yourself along to a meet somewhere and have a chat


scotty g - 21/11/05 at 10:24 AM

I'm building a GTS. Dimensions are similar to the "book" but changed to allow the use of Sierra parts rather than Escort bits.
You don't even have to buy the chassis as they will sell you a set of plans.


Chris Bellamy - 21/11/05 at 06:02 PM

Excuse my ignorance but what is a GTS. I was planning to build it ' by the book'. Can you get other kit versions, or pre made chassis's??? and these plans are they for the Locost or for a different kit car?
Chris


theconrodkid - 21/11/05 at 07:11 PM

have a look through the manafacturers section on the site and you will see some of the ready made chassis/bodywork options,if you want to make your own chassis,its not difficult if you can weld,the book has quite a few mistakes,jim,mcsorley plans have all the faults sorted i bellive and his plans are available on line


Chris Bellamy - 22/11/05 at 06:12 PM

Where can I get his plans online, is there a website availiable?


theconrodkid - 22/11/05 at 06:49 PM

http://www.mcsorley.net/


BKLOCO - 22/11/05 at 07:00 PM

click below for GTS tuning web site.

www.gtstuning.co.uk

Modified book plans to accept Sierra running gear will cost you a tenner.


MikeRJ - 22/11/05 at 08:49 PM

quote:
Originally posted by Chris Bellamy
Also do hub assemblies have to come from a cortina, or are the other alertnatives?


You can use the Sierra uprights with special conversion "mushrooms" but the Cortina uprights are better in some respects if you can get them.


Chris Bellamy - 22/11/05 at 11:33 PM

Can I mix and match between using parts for the GTS and parts as from the book? so if i build the GTS Chassis from their plans do I have to use the de dion axel or can I use an escorts?
Also can a sierra 4x4 be used as a donor car?
Chris


Chris Bellamy - 28/11/05 at 04:37 PM

There are 3 different mscorley plans. Which ones are right? Is the GTS plans any good. Also ive heard about a Building CD you can get. Is it any good?


scotty g - 28/11/05 at 05:12 PM

Basically a GTS chassis is very similar in dimensions to "the book" chassis, the main difference is that its been brought up to date to use Sierra bits. The scuttle, bonnet and nose cone are a bit taller to allow room for a wider choice of engines but will fit on a "book chassis".
If you want then you could use an Escort axle on a GTS but if you're using a Sierra as a donor then the de-dion is the better option anyway.