Board logo

Searching about Req-flow Zetec 2.0
Boris Lahnor - 28/1/06 at 09:01 PM

Hello,

I'm searching about the req-flow rate for my MegaSquirt. I have a zetec 2.0 NGC engine with stock 45mm throttle-body and grey injection orifice (stock). I want to controll ignition and injection of the engine with the MegaSquirt V3.0. But I dont know the flow rate (lb/h) from the grey orifice. Does anybody have a MegaSquirt mapping for the Zetec? I haven't found anything on the MS-forum.

Thanks for help
Bo

rayward - 28/1/06 at 09:06 PM

greys are 330cc/min.

Ray

[Edited on 28/1/06 by rayward]

[Edited on 28/1/06 by rayward]

Boris Lahnor - 29/1/06 at 08:39 AM

quote:
Originally posted by rayward
greys are 330cc/min.

Ray

[Edited on 28/1/06 by rayward]

[Edited on 28/1/06 by rayward]


Thanks Ray

Does somebody drives his zetec engine with MegaSquirt???

Regards
Bo

Boris Lahnor - 31/1/06 at 11:50 AM

Bosch told me that the rate from this kind of injector is 188 ccm/min (19,9 lb/h) with 3.8 bar pressure.
It's number is: 0 280 155 887 or XS4U-AA
color: grey

Regards
Bo

[Edited on 31/1/06 by Boris Lahnor]