JUst a quick question for all you guru's put there.
Are all type 9 output shafts the same size?
Also the same for the Mk2 escort diff flange. Are they all the same.
Thanks for anyhelp. Much appreciated.
I beleive that some type 9 shafts are longer than others.
Thats the input shaft though isnt it?
Yes - those designed for V6 engines are a little longer...
Yup, all type 9 output shafts are the same, and all "English" diff flanges are too, but a few mk2 escys had salisbury axles, which are
different.
If the entire carrier bolts into the axle casing then it's an english
Yep english. Cheers chaps i can order me propshaft now.
There is actually to sizes of diff flange fitted to english axles, the larger size also fitted to sierras etc and a smaller one that was used on
earlier and 1100 cc cars as far as i know.
My axle came from a 1100 saloon and had the small flange, I had to swap it with one from another diff to suit my prop with the larger flanges, so
worth checking your diff flange size before ordering.
Paul
quote:
Originally posted by NS Dev
and all "English" diff flanges are too, but a few mk2 escys had salisbury axles, which are different.
If the entire carrier bolts into the axle casing then it's an english
Ordered my Prop from D&F. The 2 diff flanges are 109mm and 87mm. He says the smaller is rare.