Board logo

Zetec Engine number
brashhighlander - 10/3/06 at 11:57 PM

Hi Folks

I have just spent the last couple of hours trying to make out the engine number on my 97 2.0l zetec. I think it is NGA UA 96236. Does this number make sense, it is just that my number is not what you would called stamped on, more like scribbled on.

Also as my engine is going to have to do the cat emissions test at sva do I have to prove engine number and age?

Thanks


brashhighlander - 11/3/06 at 12:00 AM

picture attached


brashhighlander - 11/3/06 at 12:01 AM

try again, picture attached


brashhighlander - 11/3/06 at 12:16 AM

last attempt


brashhighlander - 11/3/06 at 12:18 AM

aaaarrrggh

see photo archive and can some tell me how to post pictures.

Thanks


stevebubs - 11/3/06 at 12:29 AM

Save it as a JPG[img]http://locostbuilders.co.uk/upload/a337402-IMGP1649[1].jpg[/img]


stevebubs - 11/3/06 at 12:32 AM

PRetty hard to read...perhaps worth giving these guys a ring (poached from www.sylva.co.uk)

Technical Help Line: 0906 5533447. This is a premium rate phone line!

Technical Information Centre
Ford Motor Company
PO Box 300
Walsall
WS5 4QH


stevebubs - 11/3/06 at 12:34 AM

quote:
Originally posted by brashhighlander
Also as my engine is going to have to do the cat emissions test at sva do I have to prove engine number and age?



No.


stevebubs - 11/3/06 at 12:36 AM

Zoomed out, it looks like your initial reading was right..

[Edited on 11/3/06 by stevebubs][img]http://locostbuilders.co.uk/upload/a337407-IMGP1649[1].jpg[/img]


brashhighlander - 11/3/06 at 08:03 AM

Cheers Steve. Good to have a second opinion. As I don't have to prove my engine age i will just go what the number that i think it is.


Dusty - 11/3/06 at 10:00 AM

VA is July 97. Ford don't do U. I would guess at VA 96286

[Edited on 11/3/06 by Dusty]


02GF74 - 14/3/06 at 03:46 PM

it looks like WA to me; which makers it Nov 98., unless it is a funny V.

see http://www.toyne.org.uk/kit-car/docs-age.html


Ian D - 22/3/06 at 10:05 PM

Have you looked on the hesad at the back I have the engine number repeated there and its a lot more readable.
Ian