Board logo

flywheel
theconrodkid - 31/3/06 at 01:55 PM

someone told me a CVH flywheel MAY fit a 2.0 zetec.
ive seen one,it looks lighter,anyone know for deffo before i get my hands dirty for nowt?

MikeR - 31/3/06 at 02:07 PM

won't be for nout if you share the expience with us lot

givemethebighammer - 31/3/06 at 02:41 PM

the escort 1.8 16v (zetec) one fits and is loads lighter than the 2.0L zetec one. Is the CVH one lighter than this ?

theconrodkid - 31/3/06 at 03:57 PM

the cvh one looks smaller ie lighter,its free but ill get dirty and use 5 mins of my life removing it.you can do a lot in 5 mins

DorsetStrider - 31/3/06 at 04:09 PM

A person can do a lot TWICE in 5 minutes....erm.....allegedly.....erm.....so I'm told.


d'OH!

MikeR - 31/3/06 at 04:38 PM

what, remove two flywheels - now thats just bragging

emsfactory - 31/3/06 at 05:25 PM

quote:
Originally posted by DorsetStrider
A person can do a lot TWICE in 5 minutes....erm.....allegedly.....erm.....so I'm told.


d'OH!


Yeh, but you need powerfull forearms.

MikeR - 31/3/06 at 05:58 PM

i thought these flywheels weren't that heavy

rusty nuts - 31/3/06 at 06:12 PM

Does the CVH flywheel have the 36 teeth for crankshaft position? None that i've seen have. Think I have an 1800 Zetec flywheel somewhere , bit rusty but OK if you need one

britishtrident - 31/3/06 at 06:47 PM

quote:
Originally posted by rusty nuts
Does the CVH flywheel have the 36 teeth for crankshaft position? None that i've seen have. Think I have an 1800 Zetec flywheel somewhere , bit rusty but OK if you need one



1800 zetec flywheel is the best bet.

Some CVH flywheels have 36-1 but ISTR only on late models also various clutches were used on the CVH and it isn't always easy to match some to a 23 spline input shaft -- of a type 9 of course if you are using an MT75 it is different again.

theconrodkid - 31/3/06 at 06:50 PM

rusty me old mate,il have the flywheel

rusty nuts - 31/3/06 at 07:25 PM

It's yours Conrod ,when/how do you want it ? Can get it to Lingfield in Surrey after Easter if thats any help or Stoneleigh?

Mansfield - 31/3/06 at 07:51 PM

This thread any use?

http://locostbuilders.co.uk/viewthread.php?tid=40516

1992 CFi 1.6 Sierra.

theconrodkid - 1/4/06 at 06:59 AM

rusty,ill be at stonleigh,you have u2u...note to myself,hire artic to bring back the stuff ill be buying there