Board logo

supercharger inlet manifold
Monkeybasher - 21/4/06 at 03:30 PM

Hi,

Does anybody know of an inlet manifold I could use with my supercharger, or will I have to have to have a custom inlet made. I would prefere it to be small as possible so I can mount the charger below the inlet.

Cheers

Steve

Wadders - 21/4/06 at 04:15 PM

If your using an eaton mini supercharger, a bloke on ebay sells custom inlets and outlets.

Krismc - 21/4/06 at 05:21 PM

did i hear the word supercharger.... and on a zetec

...tell me more, where how much and pics please!

[Edited on 21/4/06 by Krismc]

Monkeybasher - 21/4/06 at 06:45 PM

quote:
Originally posted by Wadders
If your using an eaton mini supercharger, a bloke on ebay sells custom inlets and outlets.


Thanks thats very handy to know.

I still need an inlet manifold though.

Krismc, I am still trying to work everything out myself. I have an eaton m45 charger a custom charge cooler and a megasquirt ECU. I am still working out a whole load of stuff. Inlet manifold being the next main hurdle.

Hopefully it will be a cheap conversion.

ECU £150
cooler £100
supercharger £100
inlet manifold ?????
pipes ???




Cheers

Steve

DIY Si - 21/4/06 at 06:54 PM

Is there any way you could use the original manifold and use an air box type thing feeding from the bottom?

Krismc - 21/4/06 at 07:01 PM

Ill leave you too it then, and see how reliable it is before stoopid me does it, and trys to fit a dodge ram supercharger or sumthing

and you got any pics???

[Edited on 21/4/06 by Krismc]