[img]http://i19.ebayimg.com/04/i/06/e2/38/f2_1_b.JPG[img]

i got these 2005 K5 GSXR740 TB's for £75 and the seller also has a mega squirt for £200 which she will send away with this item,
http://cgi.ebay.co.uk/MegaSquirt-for-any-Zetec-Duratec-CVH-EngineI_W0QQitemZ8058642607QQcategoryZ122139QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

my question is, is it a good price? is there any thing else ill need? wiring loom etc

and im a total novice remember!

[Edited on 21/4/06 by Krismc]

Seems expensive, ive seen people selling built ones that look very similar to the one in the picture for £125.

You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.

If you're unsure of anything to do with it, I'd skip it and buy directly from a trusted source.

If you're unsure of anything to do with it, I'd skip it and buy directly from a trusted source as you'll then get backup.

For simplest wiring, my advice would be to buy a prebuilt v3 board with extra VB921 ignition driver.

yea i best do that...

and

quote:

---

You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.

---

If you go for a V3 with extra VB921, then you don't need the EDIS module...

But if you buy the V2.2 one... then fleabay will help...

Clicky

quote:

---

Originally posted by Krismc
yea i best do that...

and

quote:

---

You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.

---

the scrap man no what a EDIS 4 MODULE is cause i dont! im guessing he knows what a crank sensor is, and which coil pack do i need!

---

quote:

---

quote:
--------------------------------------------------------------------------------
Originally posted by Krismc
yea i best do that...

and
quote:
--------------------------------------------------------------------------------
You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.

--------------------------------------------------------------------------------



the scrap man no what a EDIS 4 MODULE is cause i dont! im guessing he knows what a crank sensor is, and which coil pack do i need!
--------------------------------------------------------------------------------



Use the zetec coil pack, and the standard crank sensor - you should have got those with your engine....

---