what engine and gearbox mounts do i use for the 1.6 zetec and type 9 box?

For the type 9 box do the same as everybody else and drill the rivets out of the Sierra mount and just use the centre of it, it fits the locost tunnel spot on. You are on your own with the engine mounts but several people I have read have mounted them from the alternator bracket and gearbox bellhousing bolts.

yours, Pete.

The are some pics on my section,worth calling MK or other locost suppliers. It is easier to mod the chassis mounting plates if they are in the wrong place than make the mounts from scratch.

There are some plans for Zetec mounts in my photo section, I found them somewhere on my travels through the web. Made from 3mm steel sheet and 50mm square tube.