btw hi from sweden.
Iam asking for advice here becasu there arent many people in sweden building sevens.

Do anyone know how the kawazaki zzr 1300 is to put in the seven.compared to other bike engines.?
I have seen many hayabusa,R6 or R9,fireblade cars but none with a zzr 1300

Edit: and where can u buy all the parts needed to conect it to the diff.?

[Edited on 4/8/06 by lynix]

The ZZR1300 was only introduced in 2006, so very few engines would be available at the moment I'd guess. The closest engine to this would be the ZX12R, which is quite a popular engine in bike engined sevens.

The only parts needed to connect a bike engine to the diff are a propshaft adapter flange, which fits in place of the output sprocket and a propshaft to connect the diff. Both these parts are commonly available from most kit car manufacturers and e-bay.

Phil

I thought about using a ZZR1200 engine. I like the wider spaced gear ratios than on 1000cc bike engines. They are a bit expensive so I went for the cheaper and more popular R1. It is easier to get car fitting parts and advice for R1s and Fireblades than for unusual engines.

The ZZR1400 (or is it ZX14) would be my choice though.