I am interested in how people have installed the Blacktop Zetec to get the water pump running in the right rotation & mount the alternator. The problem seems to be fitting an idler pulley but still retaining the belt guards, which are essential if you run into a gravel trap. Any pics would be a great help.
Chers
Ian

This is the best picture i have of how i did it - the green lines represent the belt.
Image deleted by owner

[Edited on 10/9/06 by Project7]

Loads of good info here..

http://boardroom.wscc.co.uk/cgi-bin/ikonboard.cgi?act=ST;f=3;t=32834
[Edited on 10/9/06 by stevebubs]