will a 1.6 inlet manifold for dcoes fit on a 2.0 engine

Don't know - but it works the other way round. That's a definite, or it was with Burton manifold about 8 years or so ago.

It will fit on a 1.8 engine (I know because it's what i'm using ) if that helps any?

Cheers


Alex

I think the port size on the 1.6 manifold is slightly smaller, but if you need to know for sure let me know and i'll measure it for you

[Edited on 22/10/06 by ecosse]

John: I take it you know your avatar is upside down? Any particular reason

[Edited on 22/10/06 by ecosse]

Well, Mark allanson decided to go with sideways, so I figured I would go one better....

quote:

---

Originally posted by zilspeed
Well, Mark allanson decided to go with sideways, so I figured I would go one better....

---

Yes, it will. Use the 2.0 throttle body though (needs a little tweak with a grinder, but otherwise goes straight on) and the beige 2.0 injectors (fit straight on to the 1.6 fuel rail).

Chris