Hi All,

Can anyone confirm the threadsizes are as I understand below

Nose Pulley = 7/16 UNF

Inlet/Exhaust Manifolds = 5/16 UNC?

Many thanks in advance

[Edited on 22/10/06 by nib1980]

Manifold are 5/16"UNC, but what do you mean by nose pulley? The one on the crank?

Been for a quick check, the crank pulley is 7/16"UNF.

[Edited on 22/10/06 by gazza285]

yep the crank pulley.

Many thanks!!

From memory the exhaust studs are 5/16" UNC on the end that screws into the head and 5/16"UNF for the nut thread.

Also correct.