Board logo

What do i need?
timex - 19/12/06 at 06:31 PM

Can somebody give me a list of the jets and that what 45 Dellorto`s need with a 2.0l Zetec as a starting point? please??????????


cossiebri - 19/12/06 at 06:43 PM

Have just looked in my dellorto powertune book(speed pro series), It doesn't list the zetec.It lists n/a cosworth,vx xe/redtop, 2 l /2.1 pinto
If it is any good i will let you know for any of the above,poss xe as a starting point?


timex - 19/12/06 at 06:57 PM

Ive also got that book, dellorto powertune book(speed pro series)! Just my look that no mention of Zetec.


cossiebri - 19/12/06 at 07:31 PM

I used the book when i got some s/h dcoe's for my old mk2 escort with 2.1 pinto,almost spot on then used a colourtune to good effect!


thunderace - 19/12/06 at 08:16 PM

hi i asked them
http://www.dellorto.co.uk/
and they told me a rough guide so i got a micro drill set and drilled them out myself it cost me £3 on ebay to do all my jets.


MikeR - 19/12/06 at 11:59 PM

have you looked up DVA's web site / downloaded his jetting program?

If not look up Dave Andrews and jetting.exe or DVA power (his company). It will get you pretty close based on theory.


timex - 20/12/06 at 11:30 AM

Just looked at Dave Andrews jetting program and received E mail from Dellorto UK. The suggestions from both of them are very close, so I are just going to go check what jets and that I have in at the mo! See if they is any major differance.


timex - 20/12/06 at 12:17 PM

Dellorto UK= 38 Chokes, 155 Main Jets, 180 Air Correctors, 7772.5 Emulsion Tubes, 42 Pump Jets, 60 idles.....Currently Got= 37 Chokes, 150 Main Jets, 177.5 Air Correctors, 7772.7 Emulsion Tubes, 42 Pump Jets, 60 Idles