I have a Capri pedal box and twin webbers.

Can anyone help me with advice or better still a pic on how to make up a cable that starts with a single at the the pedal and splits in two for the carbs?

Thanks

Gary

Hi Gary

I used a Cortina pedal box on the Special running twin Webers. I fitted a block to the top of the accelerator pedal to take the two cables which ran back to the box. I believe Rally Design supply similar blocks. Can you do the same? If so, it will save having a cable junction with compensator.

Best wishes

John

Hi on some push bikes they have cables that go from 1 to 2 cables on the brakes this may help you
Jacko

you can buy a kit on ebay.

Item number: 150051757731
and
Item number: 8033979149

hope this helps

A lot of older Yamaha dirt bikes (any of the Autolube 2-strokes) had a neat 1-into-2 cable setup that might work very well. Eg.: '70's and '80's Yamaha DT250, and many others.

Thanks folks - got what I needed!

Cheers

Gary