hey again,

i am trying to find some rubber engine mounts to use with fitting my engine, however i already have some mounts that require rubber mounts that are 73mm across and 37mm high in a circular shape. these are for the gearbox, they should reduce tramp and hopefully make the gearbox last abit longer! i think they are ford capri/cortina ones but am not a 100% sure on this, i need 3 for my gearbox and may as well use them for the engine as well but does anyone know where i can get some from? i have not found anywhere on the web that will sell me any!

many thanks

Have a look at the landrover ones - a bit stiffer than Ford so more suited to higher output engines.

Here you go



£5.99 per pair
Link

I used these on my V6 and they seem quite firm enough

[Edited on 23-1-07 by RazMan]

oooh thats great! i had a look at landrover mounts and could only find ones that were rectangular! these should do nicely

cheers

I used for my ultra heavy Pinto the same ones that MK use which are Fiesta gearbox mounts I believe.

Two of them plus a Westfield new gearbox mount and it seems to be as solidly mounted as I'd want.

Cheers,
James

Hi rally deighn do them in std road or harder competition versions and at 38mm tall or 50 tall.

LINK.

cheers matt

Paddock Spares...

The font of all low cost bits for ya locost...

Engine Mounts

Cheers

Peter