Im looking for a ford clutchplate to meet my MT-75 (23 splines). It has to be 215mm wide and needs to hold to bout 240 bhp. Anyone know where I can get that?
Cheers
Stew

I think the standard Mondeo one is good up to 250bhp

It's not HP, but TORQUE that kills the clutches.

Try an Transit clutch. Beefier than a car type.

Cheers,
Syd.

i'll be looking at around 280nm of torque which is like 210 lb/ft. do you think a transit clutchplate can take that? and that one is 215mm wide and will fit a MT75?
cheert