Has anyone got Mark Allansons .pdf for his pinto sump mods.

I did have it but can't find it and the original thread link seems to be dead.

Also as my brother is a plumber would a soldered joint be OK for the shortened pick-up pipe rather than brazing?

Cheers

pajsh

Hi,

I did have a copy of marks pdf but buggered if i can find it on my computer

As for the pick up pipe, i silver soldered mine together with some silver solder 'borrowed' from work. Doesnt need as much heat as brazing (~600deg instead of 800+), so is doable with a couple of blowtorches, but better than soft soldering which melts at ~200 deg IIRC depending on the alloy.

David

Here is the link to a post that has the pdf available HERE

I used this one though HERE
Regards

Rich

[Edited on 10/2/07 by RichardK]

Posted thanks on the wrong link.

Trying to rush to get to watch the rugby

You only have to ask