Is there any 7 style car out there that has one fitted? Im going through a long list of engine choices and im very interested in fitting something jap. Ive seen a few conversations on the impreza engine but not seen one or heard of one being fitted.

i know its a wide lump but how wide? and what gear box can be fitted to it?

will it put all the power to the rear or will it still be split?

I know engines but still learning gearbox's.

[Edited on 24/2/07 by CraigJ]

I should think a flat four would stick out further than the side panels.

stu

im aware the engine is wider, im trying to fine the dimensions of the engine and also the width of the new haynes chassis.

Twos covered not long since, check out this thread for more info!

http://www.locostbuilders.co.uk/viewthread.php?tid=60035

hth.
john.

it won't fit.. i looked into putting one in a clio

if you want an easy jap convo go for the 200sx s13. loads off people to help you on that.

BUT why do you wanna go jap.... i only went for big power but if i could go back now i would definatly fit an 1.8 20V turbo in there now someone does the bellhousing to mt75...

jap you say? I would suggest something light with a 12k rev limit.