Board logo

timing light
graememk - 14/4/08 at 10:07 PM

could someone give me a timing light recomendation from ebay please

i'm rinning ford coil and wasted spark if it makes any differance

[Edited on 14/4/08 by graememk]


RazMan - 14/4/08 at 10:14 PM

I found the Gunson jobbie quite good - just clip over an HT lead, connect to the battery and start adjusting


Paradoxia0 - 14/4/08 at 10:32 PM

Hi Graeme

I have a Gunson (I think) timing light you can borrow if you like?

Mark


Paul TigerB6 - 14/4/08 at 10:47 PM

Just done the timing on the Pinto / MegaJolt with wasted spark myself with the Gunsons jobbie. Such an easy job to do with that bit of kit - took me about 5 mins to clip it on, adjust the timing to 10deg and tighten the bracket back up.


triumphdave - 15/4/08 at 12:10 AM

Gunson here too