adrianreeve
|
| posted on 13/1/09 at 11:46 AM |
|
|
xr4i gearbox
Can anyone clear this up for me? I've got an xr4i gearbox, which has the longer input shaft. I also have the onger bellhousing that came with
it. Do I still need to fit a spacer between bellhousing and gearbox to fit this to a zetec engine, or does the bellhousing do that job for me?
Cheers
Adrian
|
|
|
|
|
scutter
|
| posted on 13/1/09 at 11:59 AM |
|
|
The V6 bellhousing is too tall at the top and won't bolt to a zetec, Sorry.
It's a normal 4 cylinder bellhousing and a spacer i'm afraid.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
mookaloid
|
| posted on 13/1/09 at 12:15 PM |
|
|
As above ^^^^^ also you can get a suitable spacer and longer bolts from Caterham - don't bother trying to make one.
Some people say that you can get away with shortening the input shaft, but I tend to think that this is vandalism of a very good bit of kit.
Cheers
Mark
"That thing you're thinking - it wont be that."
|
|
|
scutter
|
| posted on 13/1/09 at 12:30 PM |
|
|
I'll let you know about shortening the input shaft next month
The less I worked, the more i liked it.
|
|
|
