Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Silver top sump
ragindave

posted on 18/2/09 at 10:56 AM Reply With Quote
Silver top sump

Silver top alloy sump what is the difference between the 2.0 and 1.8 sumps if any if different how can you tell.
Thanks.

View User's Profile View All Posts By User U2U Member
Danozeman

posted on 18/2/09 at 11:01 AM Reply With Quote
the escort 1.8 sumps are shallower than the 2 litre ones.





Dan

Built the purple peril!! Let the modifications begin!!

http://www.eastangliankitcars.co.uk

View User's Profile View All Posts By User U2U Member
ragindave

posted on 18/2/09 at 11:52 AM Reply With Quote
So would a 1.8 silver top sump fit a 2.0 silver top?
It will have to have the depth reduced anyway.
Thanks

View User's Profile View All Posts By User U2U Member
r1_pete

posted on 18/2/09 at 12:02 PM Reply With Quote
Yes it will fit ok, all 1.6 1.8 and 2.0 have the same stroke, so no worries there. Remember you may need to re-calibrate the dipstick for the correct ammount of oil for the engine size.






View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
ragindave

posted on 18/2/09 at 12:40 PM Reply With Quote
thanks
View User's Profile View All Posts By User U2U Member
Dusty

posted on 18/2/09 at 02:48 PM Reply With Quote
quote:

It will have to have the depth reduced anyway.

I'm being a bit slow here but if you have to chop it anyway why not save your money and chop the 2litre one.

View User's Profile E-Mail User View All Posts By User U2U Member
big_wasa

posted on 18/2/09 at 06:38 PM Reply With Quote
The bowl is at the front on the escort and back on the mondeo.

When getting another sump make sure you get the windage tray and oil pick up pipe as they are differant.

View User's Profile View All Posts By User U2U Member
Danozeman

posted on 18/2/09 at 06:39 PM Reply With Quote
It will go on. get the dipstick, dipstick tube and pick up from the escort 1.8 lump.

Mine hangs quite low under the chassis. When i sva'd it the sump bottomed out on the brake rollers and we had to lift the car out as it was stuck in.





Dan

Built the purple peril!! Let the modifications begin!!

http://www.eastangliankitcars.co.uk

View User's Profile View All Posts By User U2U Member
ragindave

posted on 18/2/09 at 11:56 PM Reply With Quote
thanks for the info i have purchased a modded zetec sump but i am not sure what it was off i do not have an engine yet but am collecting all the bits i need ....for a zetec conversion
View User's Profile View All Posts By User U2U Member
Schrodinger

posted on 19/2/09 at 11:13 AM Reply With Quote
quote:
Originally posted by r1_pete
Yes it will fit ok, all 1.6 1.8 and 2.0 have the same stroke, so no worries there. Remember you may need to re-calibrate the dipstick for the correct ammount of oil for the engine size.


Er no you do not want the oil any higher up the sump than it is at max currently as the cranks will aerate the oil and give you starvation problems through the pump sucking up air.





Keith
Aviemore

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.