tomgregory2000
|
| posted on 22/2/09 at 07:31 PM |
|
|
C20XE red top, i need a measurement
Does anybody have a red top close to hand that they can measure the big hose tale on the back of the water pump housing?
I think its about 45mm but i need someone to check please, i cant quite get to mine at the mo
Many thanks
Tommy
|
|
|
|
|
philw
|
| posted on 22/2/09 at 07:43 PM |
|
|
Well, according to my very-near gauge it's 35mm.
Must try harder
|
|
|
blakep82
|
| posted on 22/2/09 at 07:44 PM |
|
|
yep, 35mm on mine too, although mine is an ecotec, but its the exact same block as the xe
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
tomgregory2000
|
| posted on 22/2/09 at 07:59 PM |
|
|
thanks.
i can allways count on you guys.
I need to replace the elbow that goes onto it as mine has started to leak, that would have been a disaster if i ordered the 45mm one.
Why do these things happen only weeks before sva
Tommy
|
|
|
ss1turbo
|
| posted on 22/2/09 at 09:02 PM |
|
|
45mm on a silvertop zetec...
Long live RWD...
|
|
|
