andy188
|
| posted on 1/3/09 at 09:44 PM |
|
|
cvh carb
hi, 5 weeks to sva, do not want to cut hole in bonnet for air filter, am using pieburgh carb at present, only 25 m/m between air filter mounting and
bonnet face, looked into shorter carb, having no joy, any ideas, thanks. my engine at present is a cvh not pinto, do not know how to change my
intro
|
|
|
|
|
RichardK
|
| posted on 1/3/09 at 09:50 PM |
|
|
I left my air filter off for the sva, no issues. Cut the hole later and fitted the air filters.
Rich
Gallery updated 11/01/2011
|
|
|
speedyxjs
|
| posted on 2/3/09 at 07:57 AM |
|
|
Should be ok to just leave it off 
How long can i resist the temptation to drop a V8 in?
|
|
|
Bluemoon
|
| posted on 2/3/09 at 08:47 AM |
|
|
Simular problem with my CVH, left filter off. I have also had the inlet manifold adjusted to put it at a slight angle gains about 1cm.. I plan to put
a remote filter on latter..
Dan
|
|
|
BenB
|
| posted on 2/3/09 at 11:22 AM |
|
|
No major problem leaving it off for such a short period of time. Just be aware that you'll have to re-tune it afterwards when you put the filter
on. Certainly worth doing something about it as unless you're really lucky and the bonnet at 25mm is acting as a pulse plate you'll be
strangling the engine....
|
|
|
