coozer
|
| posted on 21/3/09 at 06:17 PM |
|
|
Bike carb jetting AFR
HI, got my AFR working now and been out for a run today seeing as it was scorchio...
1. Idle runs at 16, bit weak.
2. 30~35 runs around the 13.5 mark
3. Cruising @ 70 it drops down to 11
4. Accelerating up to WOT it runs at 14, spot on I reckon.
Now then the midrange cruising between 35 and 80 is running too rich. Do I adjust the needle position to improve this?
Any advise on any of the above points please peeps.
Ta,
Steve
1972 V8 Jago
1980 Z750
|
|
|
|
|
Paul TigerB6
|
| posted on 21/3/09 at 06:39 PM |
|
|
Moving the clip up higher will weaken the mixture yes - basically it drops the needle lower and so increases the restriction (reducing fuel flow)
|
|
|
