U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Engine & Transmission » Crossflow Single Side Draught Manifold Air Compressors at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: Crossflow Single Side Draught Manifold
Michael
Senior Builder






Posts 503
Registered 20/5/06
Location Orpington, Kent
Member Is Offline

Photo Archive Go!
Building: Locost to original plans with 1300 MkII Cross Flow
posted on 4/5/09 at 06:28 PM Reply With Quote
Crossflow Single Side Draught Manifold

Basicaly i have a Lynx Manifold, but it will mean the carb is sitting high up so will need a reasonable clearance hole in the bonnet. (This is the type that allows standard distibutor cap to be fitted)

I have been told there are other types, so realy wonder what types there are and if so the dimensions?

Thanks in advance.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Engine & Transmission » Crossflow Single Side Draught Manifold go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.