Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Help ... can anyone identify this dry sump
plentywahalla

posted on 8/5/09 at 07:59 PM Reply With Quote
Help ... can anyone identify this dry sump

I bought this zetec dry sump on ebay.

It was described as a Titan Dry Sump but it doesn't look like anything that Titan makes according to their current website.

I need to know where I can buy a suitable gasket as the standard Ford item doesn't fit. Also I need to know the rating of the high pressure pump.

Any ideas? Rescued attachment DSC00272.JPG
Rescued attachment DSC00272.JPG

View User's Profile View All Posts By User U2U Member
omega0684

posted on 8/5/09 at 08:24 PM Reply With Quote
does it have any part numbers on it at all, i just looked in the burton catalog and the titan dry sump pans in there look similar to the one you have. do you know whether its a twin scavenge kit (two stage kit) or a 3 stage.
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
plentywahalla

posted on 8/5/09 at 09:27 PM Reply With Quote
No I don't have any identifying part no's or markings at all.

There are two stages to the pump, one I assume is low pressure and one high pressure as they are of very different designs.

The pump doesn't look like anything listed by Titan or Pace or Dunell.

here is another pic Rescued attachment DSC00271.JPG
Rescued attachment DSC00271.JPG

View User's Profile View All Posts By User U2U Member
stevebubs

posted on 8/5/09 at 10:15 PM Reply With Quote
quote:
the standard Ford item doesn't fit
quote:


A bit worrying...

Is it a snug fit against the block?

View User's Profile E-Mail User View All Posts By User U2U Member
iiyama

posted on 9/5/09 at 07:45 AM Reply With Quote
Why dosent the Ford gasket fit? Surely the mating surfaces are the same shape? I changed to a dry sump on the Hayabusa and a standard Suzuki gasket fits with a little fettling.

Have you offered the sump up against the bottom of the block to make sure it fits?





If its broke, fix it. If it aint broke, take it apart and find out how it works!

View User's Profile View All Posts By User U2U Member
prackers

posted on 9/5/09 at 08:32 AM Reply With Quote
The sump gasket you need is from the early zetec.
View User's Profile View All Posts By User U2U Member
plentywahalla

posted on 9/5/09 at 06:39 PM Reply With Quote
Thanks Prackers, maybe you are right I will look into it.

The original sump pan on my engine has a flat flange mating to the block. There is no groove cast into it like the dry sump pan. The gasket therefore is also a plain flat one.

I'd still like to know who made my dry sump. I am assuming that the pump is a two stage with one scavenge pump and one high pressure pump. Therefore the high pressure delivers straight to an adapter plate on the engine block oil filter housing bypassing the original oil pump.

I'll be in trouble if it isn't, so i'd like to know for definate!

View User's Profile View All Posts By User U2U Member
sam919

posted on 27/5/22 at 04:20 PM Reply With Quote
Bit of a thread revival , did you ever find the part identity of the pump? I’ve exactly the same one, how did you plumb it?

Thanks

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.