HOL
|
| posted on 10/6/09 at 08:14 PM |
|
|
Is this the correct Zetec waterpump
Does anyone know which way the vanes should angle on the back of an escort water pump?
I have been sold one, but it looks to me like they should turn the other way round.
This the new pump- With a straight outlet as an escort should.
This is the direction of the vanes.
I have been told this second pump is a 2.0 Mondeo one as the vanes go the other way.
Also, the outlet is angled back.
Is my new pump a pukka 1.8 escort one????
[Edited on 10/6/09 by HOL]
|
|
|
|
|
austin man
|
| posted on 10/6/09 at 08:22 PM |
|
|
looks like it is you also need a new ribbed pulley for it and possibly one for the alternator
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
big_wasa
|
| posted on 10/6/09 at 08:32 PM |
|
|
Yep the top pic is a 1.6 / 1.8 escort / fiesta ect pump and as said you need a ribbed pulley from the same car
|
|
|
zetechamo
|
| posted on 10/6/09 at 09:59 PM |
|
|
if the vanes are the opposite way round to the mondeo one, then it is the correct one, and you wil need aribbed pully off eary fiesta/escort
|
|
|
HOL
|
| posted on 11/6/09 at 11:50 AM |
|
|
Thanks Guys.
The one on the car was the same as the mondeo one, but was obviously being run in the wrong direction (crankpump/alternator) and on the wrong (smooth)
pulley.
I have been rebuidling/remaking the car since buying it in December and it was sold with a knackered bottom end.
I can see that parts selction was not a strong point, for the last owner.
Andy
|
|
|
.jpg)
