luke
|
| posted on 17/6/09 at 09:58 PM |
|
|
whats it worth?
ive built up a 1300 x-flow to fit in the locost when built. im now wondering wether to go zetec instead. so im just wondering wether ill get my money
back.
spec
1300 x-flow
1600 GT head
Kent BCF2 Cam with adjustable sprocket
new oil and water pump
alloy rocker cover
all gaskets and oil seals have been replaced. and all engine cleaned up and painted blue.
also have the inlet manifold and twin choke webber, but need a clean up.
i have spent just over 300 quid, not including gaskets and paints etc.
recon i would get anywhere near it back?
|
|
|
|
|
fesycresy
|
| posted on 18/6/09 at 07:44 AM |
|
|
Have a look at this.
TimC x flow
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
Confused but excited.
|
| posted on 18/6/09 at 12:38 PM |
|
|
The short answer wouuld appear to be no. 
I recently bought a 1300 X-flow, fully re-built, off ebay for £149.99, because it was cheaper than re-building my own bottom end.
[Edited on 18/6/09 by Confused but excited.]
Tell them about the bent treacle edges!
|
|
|
.jpg){kind=avatar}
