goaty
|
| posted on 18/6/09 at 10:20 PM |
|
|
Fan Switch
Hi,
can anone tell me what fan switch i can get for my pinto? I think i want it to be On 95/Off 85... is this about right??
What one can i go into the motor factors and ask for??
The one in the is a large thread (28mm head) with 2 spade connectors, the connectors would be handy for the new one but i doesn t have to be the same
thread as i am making a water pipe with a boss to suit.
hope someone can help.
thanks
|
|
|
|
|
omega0684
|
| posted on 18/6/09 at 10:29 PM |
|
|
95on 85 off will be fine, i deally you want the sensor mounted in the rad or in the outlet pipe.
[Edited on 18/6/09 by omega0684]
|
|
|
goaty
|
| posted on 19/6/09 at 06:43 AM |
|
|
~Is in the top hose going to the rad right??
and what car can i get a switch from??
(what do i ask for when i go to the motor fators?)
thanks
|
|
|
kj
|
| posted on 19/6/09 at 06:52 AM |
|
|
Just ask to check the bottom of the switch it has them marked on, mine is from a ford focus and welded a 22mm nut into some pipe and connected up,
don't forget to put a lip on the end of the pipe so it does not come off.
on @ 92 off @ 87
[Edited on 19/6/09 by kj]
|
|
|
goaty
|
| posted on 19/6/09 at 10:22 PM |
|
|
nice one. thanks very much
|
|
|
