franky
|
| posted on 15/7/09 at 09:05 PM |
|
|
zx9r billet or shortened sump....
where can I get one of the above? think i'm going to stick with the 9 lump as a replacement is about a quarter of the cost of a zx12!
|
|
|
|
|
eccsmk
|
| posted on 15/7/09 at 09:17 PM |
|
|
here
well definately worth a try anyway
HTH
*edit*
ooh 2100 posts 
[Edited on 15/7/09 by eccsmk]
|
|
|
imp paul
|
| posted on 15/7/09 at 09:25 PM |
|
|
http://www.novaracing.co.uk/ 
|
|
|
franky
|
| posted on 15/7/09 at 09:28 PM |
|
|
thought they would be worth a go....heard they're a bit pricey though!?
|
|
|
mistergrumpy
|
| posted on 15/7/09 at 09:28 PM |
|
|
Do you need a shortened sump? I know I don't and I get over the speed bumps fine and onto the SVA rollers no problems.
|
|
|
franky
|
| posted on 15/7/09 at 09:33 PM |
|
|
not measured properly but looks like about 3"
|
|
|
matt.c
|
| posted on 16/7/09 at 04:58 AM |
|
|
Get the standard zx9 sump choped. "Deneo" done mine for me. U2U him for details.
|
|
|
aka Keith
|
| posted on 16/7/09 at 05:28 AM |
|
|
Like Matt, Deno chopped my sump. I also put in a baffle plate at the same time when it all went back together.
Cheers
Craig
|
|
|
JoelP
|
| posted on 16/7/09 at 11:47 AM |
|
|
quote:
Originally posted by mistergrumpy
Do you need a shortened sump? I know I don't and I get over the speed bumps fine and onto the SVA rollers no problems.
how much sump sticks out the bottom of your car? I had an inch off the sump and still had an inch out the bottom, with the air filter touching the
bonnet.
|
|
|
franky
|
| posted on 16/7/09 at 01:23 PM |
|
|
quote:
Originally posted by JoelP
quote:
Originally posted by mistergrumpy
Do you need a shortened sump? I know I don't and I get over the speed bumps fine and onto the SVA rollers no problems.
how much sump sticks out the bottom of your car? I had an inch off the sump and still had an inch out the bottom, with the air filter touching the
bonnet.
sent him a U2U.... just hope he gets back to me.
|
|
|
mistergrumpy
|
| posted on 16/7/09 at 03:40 PM |
|
|
I have about the depth of the sump lobe sticking from the bottom but then I have taller bodywork by Luego so I hitched the engine up so its touching
the bonnet too.
I can measure it to be exact if you like.
Franky, if you mean you U2U'd me then I haven't got anything through.
[Edited on 16/7/09 by mistergrumpy]
|
|
|
.JPG)
