jpindy3
|
| posted on 24/7/09 at 07:35 PM |
|
|
i need a smaller alternator
i need to find a smaller alternator has anyone got any ideas on what car i could get one from,i have a pinto bottom end.
is one out of a suzuci jeep smaller,dose anyone know
|
|
|
|
|
prelude1980
|
| posted on 24/7/09 at 07:46 PM |
|
|
i think one from a daihatsu charade is small
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
prelude1980
|
| posted on 24/7/09 at 07:52 PM |
|
|
one on ebay but a bit expensive thou
ebay
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
jpindy3
|
| posted on 24/7/09 at 08:16 PM |
|
|
quote:
Originally posted by prelude1980
one on ebay but a bit expensive thou
ebay
do you think this will be smaller then.its hard to tell in pics.
the was one on ebay thats new and for a mgbt and that looked really small
|
|
|
vinny1275
|
| posted on 24/7/09 at 08:21 PM |
|
|
We used a nippon denso alternator (daihatsu hijet van and charade car iirc). We had to make a custom bracket to fit it on, but it is tiny (90mm dia I
think) - take a look at my blog for piccies of it, and a description of how we made it fit (205 block Pinto)
HTH
Vince
|
|
|
lotusmadandy
|
| posted on 24/7/09 at 08:23 PM |
|
|
Mine is from a nissan micra,it's a
nippondenso,nice and compact with the
fan on the inside.I bought it because the
sierra unit was far too big.
Andy
|
|
|
Werner Van Loock
|
| posted on 24/7/09 at 08:24 PM |
|
|
I'm afraid that they don't come any smaller then the denso's
http://www.clubstylus.be
|
|
|
jpindy3
|
| posted on 24/7/09 at 08:38 PM |
|
|
thanks ladsim going up the scrapy tomorrow
|
|
|
bonzoronnie
|
| posted on 24/7/09 at 08:58 PM |
|
|
Here is a picture of one that I removed from a Daihatsu Sportrack
Another nippon-denso unit
[img] [/img]
Going to be using it on my Zetec install
|
|
|
big_wasa
|
| posted on 24/7/09 at 08:59 PM |
|
|
also found on the fourtrak
|
|
|
jpindy3
|
| posted on 24/7/09 at 09:11 PM |
|
|
quote:
Originally posted by bonzoronnie
Here is a picture of one that I removed from a Daihatsu Sportrack
Another nippon-denso unit
[img][/img]
Going to be using it on my Zetec install
do you think i would be able to fit my v shape pulley off of my pinto one?
|
|
|
Dusty
|
| posted on 24/7/09 at 10:06 PM |
|
|
Bedford rascal or equivalent suzuki tiny van had V pulleys on as do some of the charades.
|
|
|
jpindy3
|
| posted on 24/7/09 at 10:16 PM |
|
|
i just got one its from a daihatsu van,it looks the same as the one in the pic but has a v pulley,
thanks guys
|
|
|
