marcjagman
|
| posted on 1/8/09 at 04:51 PM |
|
|
Engine/gearbox adaptors
Can anyone tell me how to make adaptors to make engines and gearboxes from different makes of cars fit each other, eg Vauxhall engine/ford box,
V8/ford box etc or even the web address of were I can get one from.
|
|
|
|
|
clairetoo
|
| posted on 1/8/09 at 05:12 PM |
|
|
I dont know anywhere that will do a `custom` adapter plate - so I made my own 
What engine do you want to connect to what gearbox ?
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
marcjagman
|
| posted on 1/8/09 at 05:14 PM |
|
|
Not decided yet as starting new project, at long last, just looking for pointers before I start.
|
|
|
clairetoo
|
| posted on 1/8/09 at 05:29 PM |
|
|
There are a few things to watch out for when putting together an `odd` combination - on mine there was nowhere to mount the starter motor , so it had
to go on the plate , and then a one-off flywheel was needed since there was barely enough room for the starter (the clutch had to move back 20mm , but
the starter couldnt)
[img][/img]
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
mark chandler
|
| posted on 1/8/09 at 05:52 PM |
|
|
Another option is to cut and weld the bell housings together if both ali.
[Edited on 1/8/09 by mark chandler]
|
|
|
repper
|
| posted on 1/8/09 at 07:34 PM |
|
|
iam puting a rover V8 in with a ford T5 gear box as it was used in the TVR ive found the guys at TVR power very help full cost me £150 for a complet
bell houseing
 
|
|
|
Theshed
|
| posted on 1/8/09 at 08:40 PM |
|
|
Pretty much anything can be joined to anything else but if you can avoid it why bother? If you have a blank canvas find an engine gearbox combo with
an available bellhousing/adapter there are heaps available.
If you want to design your own but lack Clairtoo's skills or great big milling machine/laser cutter then you could design your own adapter using
e-machineshop.com
|
|
|
bj928
|
| posted on 1/8/09 at 08:45 PM |
|
|
so many bellhousings made now, means you won't need to look far for one already made, the first thing is to find the engine you want to use and
then post here to find the bellhousing, a lot of engines are used in different cars by different makers, so very often, e.g. the ford v6 duratec as
fitted to mondeo st. is same engine as base model jag S TYPE and jag do a 5 speed fitting it inline not transverse, lots of other options like this if
you know where to look.
|
|
|
marcjagman
|
| posted on 18/8/09 at 02:40 PM |
|
|
Thanks very much, will bear that in mind.
|
|
|
