Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Propshafts Where to buy/service
thepest

posted on 4/8/09 at 11:56 AM Reply With Quote
Propshafts Where to buy/service

As the title says, I need a propshaft for my Locost. The current one I have has a little slack on the rear cross,hence cannot balance it. Unfortunately its a press fit one (not the circlip type).

Other than sourcing another propshaft from a MK2 escort cutting welding & balancing, are there any cheaper options with regard to buying one ready made?

View User's Profile View All Posts By User U2U Member
prawnabie

posted on 4/8/09 at 11:59 AM Reply With Quote
I just got mine back from driveshaft uk, excellent service and quality product - fully recommend them.
View User's Profile View All Posts By User U2U Member
RichardK

posted on 4/8/09 at 12:07 PM Reply With Quote
Hi mate, you ok? I used Dunning and Fairbank in Leeds, www.propshafts.co.uk and they were great and reasonably priced, all they needs was a measurement was from the diff face to the oil seal on the gearbox. You may want to email them to ask what they need and you could then supply a drawing.

I'm always around that area so could collect for you, thats not a problem and poss meet up when you next fly into Leeds/Bradford?

Take care mate.

See ya

Rich





Gallery updated 11/01/2011

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
blakep82

posted on 4/8/09 at 12:24 PM Reply With Quote
i used D&F too, highly recommend
View User's Profile View All Posts By User U2U Member
Charlie_Zetec

posted on 4/8/09 at 12:40 PM Reply With Quote
The one I got with my build was from Bailey Morris - have had contact with them about sizes etc. and they've been really helpful.

Prices weren't too bad either, from what I remember.





Artificial intelligence is no match for natural stupidity!

View User's Profile View All Posts By User U2U Member
pewe

posted on 4/8/09 at 01:13 PM Reply With Quote
What was said above about D&F but if it's easier they have a branch near Heathrow at Feltham called Propshaft Services tel: 00442088442265. who were very helpful.
They fitted a larger UJ to mine, did it in a couple of hours and charged the princely sum of £25.
Cheers, Pewe

[Edited on 4/8/09 by pewe]

View User's Profile View All Posts By User U2U Member
blakep82

posted on 4/8/09 at 01:23 PM Reply With Quote
for getting a new prop made, d&f came in about £40 cheaper than bailey morris





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
IanBrace
Builder






Posts 159
Registered 21/5/09
Location Lincoln
Member Is Offline

Photo Archive Go!
Building: Re-built 1986 O and C Sport and sold it! Now a K s

posted on 4/8/09 at 01:52 PM Reply With Quote
I used D&F too, highly recommend them.. good price too...





www.aerialphotography.org.uk

View User's Profile Visit User's Homepage View All Posts By User U2U Member
big_wasa

posted on 4/8/09 at 02:54 PM Reply With Quote
D&F again

As good a service as you will get anywhere.

View User's Profile View All Posts By User U2U Member
thepest

posted on 4/8/09 at 03:39 PM Reply With Quote
Thanks Guys, I'll give them a call and see what they tell me.

I'm doing ok Rich, how about you? If I do fly to leeds I'll definetly give you a shout

Should you ever fly down to where I am for some sun/holidays pls let me know too, this time drinks on me

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.