owelly
|
| posted on 13/8/09 at 07:04 PM |
|
|
2.0ltr Zetec Headbolt Torque Settings Needed ASAP!
I'm asking for a fellow forum chum over on the PPC forum.
I seems to think it's 30 Nm + 90 degree's + another 90 degree's but I know you folks will be certain!!
http://www.ppcmag.co.uk
|
|
|
|
|
Myke 2463
|
| posted on 13/8/09 at 07:15 PM |
|
|
Up to 4/98
Stage 1 25nm
Stage 2 45 nm
Stage 3 angle tighten 105 deg
From 5/98
Stage 1 15nm
Stage 2 40 nm
Stage 3angle tighten further 90 deg
Care of Haynes,
Mike.
|
|
|
owelly
|
| posted on 13/8/09 at 07:19 PM |
|
|
Many thanks!! I knew you guys know everything......
http://www.ppcmag.co.uk
|
|
|
owelly
|
| posted on 13/8/09 at 07:20 PM |
|
|
http://ppcmag.co.uk/forum/topic.asp?TOPIC_ID=6929
http://www.ppcmag.co.uk
|
|
|
