Surrey Dave
|
| posted on 17/8/09 at 07:03 PM |
|
|
Priceless 1.8 CVH Cam Tensioner Info!
Have removed my noisy cam belt tensioner , to find that the bearing is a readily available sealed bearing.
Bearing Number: 6203RS costs between 99p and £8.50 on Ebay
So can easily be replaced by prizing off the retaining spring washer etc.
But you will probably need a new spring washer
Although it should not come off as it is a fit.
|
|
|
|
|
big_wasa
|
| posted on 17/8/09 at 07:05 PM |
|
|
Ive just pulled a 1.8 cvh out as it was producing a smoke screen the red arrows would be proud of.
Any way any bits you want from it ?
Ps the sump ect and sensors is going on the zetec thats going back in.
|
|
|
AdrianH
|
| posted on 17/8/09 at 07:20 PM |
|
|
Keep the plastic distributor drive as they seem to break easy and could well be called for by another.
The sump would go for the Zetec I think you may know that sorry!
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|
|
big_wasa
|
| posted on 17/8/09 at 07:46 PM |
|
|
Yeh on my last one I couldnt find a drive for the rotor for love or money.
|
|
|
