Mark G
|
| posted on 23/8/09 at 10:39 AM |
|
|
Oil pressure extension + T piece
Hi all,
I've got the engine (893 blade) out of my car at the moment for a gearbox repair, whilst its out I'd like to fit an oil temp and also an
oil pressure gauge. I've had the sump tapped for the oil temp so now I need to sort out the oil pressure.
I've done a search on here and I've decided to plug an extension hose into the oil pressure switch location then have a T piece at the end
of the hose for the oil pressure sender and switch.
I've found
THIS EXTENSION HOSE and
THIS T-PIECE. Can anyone confirm if these parts are what I need for the job?
I'm slightly concerned about the hose and wether it would be any good for hot oil? If not does anyone know where I can get an extension hose
from as I searched google + ebay and these come up in their hunderds and not much else.
Many thanks
Mark.
|
|
|
|
|
Guinness
|
| posted on 23/8/09 at 11:27 AM |
|
|
Have a look at LMA as they supplied all my senders, pipes and adaptors.
http://www.lmaperformance.com/Products/products.html
HTH
Mike
|
|
|
miikae
|
| posted on 23/8/09 at 12:24 PM |
|
|
As mentioned above LMA do a complete remote T kit , as i fitted one some time ago.
Mike
If it can be done it i will be done .
|
|
|
