franky
|
| posted on 21/9/09 at 08:45 AM |
|
|
Sealing oil cooler joints...
Whats the best stuff to use when joining oil fixings to sandwich plates, cooler take offs etc. Just the usual plumbing PTFE tape ok?
|
|
|
|
|
02GF74
|
| posted on 21/9/09 at 09:42 AM |
|
|
sandwich plate will come with a large square section o-ring, likewise the filter.
the connector fittings that screw into the plate are sealed via small o-rings or dowty washers.
The pipes have connectors that seal via a concave/convex face when bolted up, much like brake pipes but bigger.
No need for PTFE tape anywhere.
|
|
|
clairetoo
|
| posted on 21/9/09 at 05:46 PM |
|
|
/\ wot he sez ! Anything you put on the fittings will probably cause leaks 
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
