gingerprince
|
| posted on 2/10/09 at 12:35 PM |
|
|
Braided hose for remote mounting oil pressure sender
Anyone know if the rubber that's uses for this sort of thing has to be a specific type for oil applications, or will something like this do:
-
ebay linky
Helluva lot cheaper than the usual suspects, but not if the rubber's gonna perish in oil?
|
|
|
|
|
miikae
|
| posted on 2/10/09 at 01:11 PM |
|
|
I dont know about that item but LMA do the proper stuff, this is there outlet on ebay
Linky
LMA have there own web site to with all there items listed.
Mike
[Edited on 2-10-2009 by miikae]
If it can be done it i will be done .
|
|
|
blakep82
|
| posted on 2/10/09 at 01:16 PM |
|
|
i think that paintball stuff is for air. not sure it'll agree with oil. best not take risks as far as oil is concerned imo
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
procomp
|
| posted on 2/10/09 at 01:31 PM |
|
|
Hi
Just get a braided brake line with the correct fittings on the ends made up. It's what we do on the race engines where we have expensive oil
pressure sender units. Saves them suffering from vibration problems.
Cheers Matt
|
|
|
40inches
|
| posted on 2/10/09 at 01:35 PM |
|
|
I used braided brake hose from Rally design. I have a 350mm length you can have for£0, if it's long enough? Has a couple of fittings on the ends
that are removable if not suitable.
^^^^ really must trype quicker
[Edited on 2-10-09 by 40inches]
|
|
|
