Toprivetguns
|
| posted on 15/10/09 at 11:05 AM |
|
|
Exhaust fabrication
Hi,
Looking for anyone who can fabricate exhaust tubing here in Herts. From the picture I just need a new centre piece from the manifold to the rear box.
The existing section slightly angles out too much.
Cheers
Only drive as fast as your angel can fly... !
|
|
|
|
|
omega0684
|
| posted on 15/10/09 at 11:12 AM |
|
|
how about sending a u2u to 907 on the forum, im sure he'll be able to help
|
|
|
blakep82
|
| posted on 15/10/09 at 11:13 AM |
|
|
or, if you can weld, slice with a cutting disc, an weld back together
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Mr Whippy
|
| posted on 15/10/09 at 11:45 AM |
|
|
seems like you could have done with 3 inches taken off the header too as the collector looks very far from the side of the car
|
|
|
blakep82
|
| posted on 15/10/09 at 11:47 AM |
|
|
hmm, actually, have you tried moving that pipe around at all? i think if you flip it over (so the end currently fitted to the silencer is on the
header side) and twist it round it should make a big difference?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Toprivetguns
|
| posted on 15/10/09 at 12:15 PM |
|
|
quote:
Originally posted by blakep82
hmm, actually, have you tried moving that pipe around at all? i think if you flip it over (so the end currently fitted to the silencer is on the
header side) and twist it round it should make a big difference?
Yes I have, however the angle changes again, lol. Also each end is sized different so the system can only fit one way.
This is orignally from Paul fishers ZX10. I know every Mk indy is unique, hence it was cheaper than a new unit assembly and would only need minor
tweaking.
[Edited on 15/10/09 by Toprivetguns]
Only drive as fast as your angel can fly... !
|
|
|
