lewis
|
| posted on 31/10/09 at 10:28 AM |
|
|
1.6 starter motor
hi all, i have a 1.6l starter motor from my 1989 sapphire donor car could i use this on my blacktop 2.0l/type 9/zetec 1.8 flywheel? or do i need the
707. thanks.
also is a AES7107 the same as a 707?
[Edited on 31/10/09 by lewis]
|
|
|
|
|
big_wasa
|
| posted on 31/10/09 at 11:37 AM |
|
|
Was the saf' pinto or cvh. The cvh should fit but the pinto one probaly will not.
The pinion interfeared with the back of the flywheel with a pinto one I tried.
|
|
|
lewis
|
| posted on 31/10/09 at 11:44 AM |
|
|
i think it was a pinto? it was on carbs if that helps
|
|
|
austin man
|
| posted on 31/10/09 at 04:16 PM |
|
|
Nope got to be the 1.8 cvh or 2l DOHC starter motor for the silvertop
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
lotusmadandy
|
| posted on 31/10/09 at 05:38 PM |
|
|
You can use the pinto starter on a zetec.
I have one fitted on my silvertop,you just need to put a 14mm spacer between the starter and bellhousing.I used m10
penny washers and welded them together.Have had no problems so far.
Andy
|
|
|
.jpg)
