RAYLEE29
|
| posted on 16/11/09 at 03:38 PM |
|
|
PINTO BIKE CARBS WATER PIPES
Hi, ive just made my manifold to take bike carbs for my pinto
Now do I need to run a pipe from it to the the outlet on the water pump via a header tank, or can i leave the manifold blank and run the pipe from the
pump to the header tank?
Anyone done either?
Ray
|
|
|
|
|
RichardK
|
| posted on 16/11/09 at 04:20 PM |
|
|
Few pictures in my gallery, but you may get the drift from this one, no cooling issues at all.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
snapper
|
| posted on 16/11/09 at 04:23 PM |
|
|
The pipe you talk of used to run from the pump to the car heater then back to the inlet manifold.
Some people just blank it off as you suggest but it is known that you can get localised hot spots in the head if you block off the flow
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
