Danozeman
|
| posted on 23/11/09 at 09:11 PM |
|
|
cheap place for thread adaptors.
Im after a 1/8 npt female to 1/4 npt male adaptor for my pressure sender.
Wheres the best place? Burtons have one for nearly 8 quid posted?
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
flak monkey
|
| posted on 23/11/09 at 09:14 PM |
|
|
Any local engineering supplies place should be able to sort you.
Will only bea few quid for a brass one.
David
Sera
http://www.motosera.com
|
|
|
nick205
|
| posted on 23/11/09 at 09:15 PM |
|
|
Have you checked these...
Vehicle Wiring Products
ETB Instruments
Rally Design
Russbost (on here)
|
|
|
rusty nuts
|
| posted on 23/11/09 at 09:41 PM |
|
|
Hydraulics engineers should be able to help for peanuts
|
|
|
stuart_g
|
| posted on 24/11/09 at 08:27 AM |
|
|
Hello Dan,
Go down to PIRTEK on Wherstead Road. I got a couple of adapters there for reasonable money when I couldn't find anything anywhere else. They
have everything on the shelf.
Cheers
Stu.
|
|
|
Danozeman
|
| posted on 24/11/09 at 12:47 PM |
|
|
Cheers stu ill try pirtek later. i know a bloke down there also. Off the shelf is nice.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
franky
|
| posted on 24/11/09 at 01:10 PM |
|
|
another vote for pirtek..... rally design/merlin and others wanted £20 odd quid for a couple of bits I wanted + post.
Pirkek, £5
|
|
|
britishtrident
|
| posted on 24/11/09 at 02:55 PM |
|
|
As long as the thread length is short it is not uknown to bodge NPT with bsp fittings.
On both the difference in T.P.Iand O.D. isn't massive - 1 tpi and 0.08-0.09 mm in both 1/8" and 1/4" bores
1/8" to 1/4" BSP adaptors are cheap as they are used for airbrush to compressor connections.
[Edited on 25/11/09 by britishtrident]
|
|
|
.jpg)
