boggle
|
| posted on 28/12/09 at 01:17 PM |
|
|
timing pinto
hi all....
i have the engine in the garage now and im in the process of setting the timing...
i need to fit the distributor and set this, also the bottom pulley has several marks, which one do i go by for tdc?
thanks
boggle
just because you are a character, doesnt mean you have character....
for all your bespoke parts, ali welding, waterjet, laser, folding, turning, milling, composite work, spraying, anodising and cad drawing....
u2u me for details
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
mookaloid
|
| posted on 28/12/09 at 02:16 PM |
|
|
isn't one of the marks longer than the rest? this should be tdc
"That thing you're thinking - it wont be that."
|
|
|
boggle
|
| posted on 28/12/09 at 02:43 PM |
|
|
the first marking is slightly wider, but otherwise they are all the same....and i cant find a marking on the top pulley
just because you are a character, doesnt mean you have character....
for all your bespoke parts, ali welding, waterjet, laser, folding, turning, milling, composite work, spraying, anodising and cad drawing....
u2u me for details
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
mookaloid
|
| posted on 28/12/09 at 02:54 PM |
|
|
that will be it.
there is a mark on the cam pulley - is that what you mean?
Put pinto timing into you tube - I think there are some videos on how to do this
"That thing you're thinking - it wont be that."
|
|
|
lotusmadandy
|
| posted on 28/12/09 at 05:03 PM |
|
|
Top pulley has an arrow in the pulley backplate.Look through the hole in the pulley and line the arrow up with a dot on the head casting.
Andy
|
|
|
boggle
|
| posted on 28/12/09 at 06:15 PM |
|
|
thanks all...will have another look tommorow..
just because you are a character, doesnt mean you have character....
for all your bespoke parts, ali welding, waterjet, laser, folding, turning, milling, composite work, spraying, anodising and cad drawing....
u2u me for details
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
