rich201283
|
| posted on 14/1/10 at 05:52 AM |
|
|
Kawasaki zx9 carb jets?
Just bought a 2.0 zetec and some kawasaki zx9r b1 carbs, The carbs dont have a tps, was going to use maf, What size jets do i need to put in?
|
|
|
|
|
kj
|
| posted on 14/1/10 at 06:37 AM |
|
|
1.5 then go up .5, i have a 2.0 pinto with 1.7.
Get the small drill bits from Cromwell tools if you want i have a couple of 1.7 i can send you, just u2u me your address.
Or you could do a search on jet size.
[Edited on 14/1/10 by kj]
Think about it, think about it again and then do it.
|
|
|
Danozeman
|
| posted on 14/1/10 at 07:28 AM |
|
|
My 1.8 zetec has 155's in and standard needles. Runs nice and goes like stink so theyr not far out. When i got them originally from bogg bros
they were setup for a 2 litre and had 190's in which i thought ran a bit rich in my 1.8.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
FASTdan
|
| posted on 14/1/10 at 10:44 AM |
|
|
our 2.0 pinto is running 1.6 mains and is actually slightly rich throughout most of the rev range.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
