Daddylonglegs
|
| posted on 23/2/10 at 09:17 AM |
|
|
Oil Pressure Sensor
Where would be the best place to get a pressure sensor to feed my VDO guage as shown below?
I'ts for a 2l Pinto, at the minute I've just got the standard fitting that gives you a warning light for low pressure.
Ta.
JB
.JPG)
It looks like the Midget is winning at the moment......
|
|
|
|
|
blakep82
|
| posted on 23/2/10 at 11:37 AM |
|
|
easiest way is to get a sender made my vdo. look for places that sell vdo gauges.
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
britishtrident
|
| posted on 23/2/10 at 01:35 PM |
|
|
You will find cheaper to buy a new gauge from McGill motorsports on ebay.
|
|
|
Daddylonglegs
|
| posted on 23/2/10 at 02:40 PM |
|
|
Ouch! Didn't realise how much a sender would be 
I think I'll drop the pressure guage and wait. I'll just fill the hole with a clock or just fill the hole.
It looks like the Midget is winning at the moment......
|
|
|
Angel Acevedo
|
| posted on 23/2/10 at 10:51 PM |
|
|
quote:
Originally posted by Daddylonglegs
Ouch! Didn't realise how much a sender would be
I think I'll drop the pressure guage and wait. I'll just fill the hole with a clock or just fill the hole.
If you already have the hole, why don´t you install the aguge and wire it.
whenever you are ready to buy...
You already have the hard work done.
Beware of what you wish.. for it may come true....
|
|
|
