rich201283
|
| posted on 2/4/10 at 09:12 AM |
|
|
Kawawasaki zx9r carbs, which pipes are the fuel inlets?
I have some Zx9r carbs - Which pipes are the fuel lines? Do i need a return to the fuel tank? And which pipes do i block up?
|
|
|
|
|
Mark G
|
| posted on 2/4/10 at 09:14 AM |
|
|
I think they are the same as blade carbs.
The inlets are the ones between cyl 1+2 & 3+4 at the bottom of the carb. There is no return to tank and the pipes coming out from the top of the
carbs are breathers so put a breather filter on them.
|
|
|
r1_pete
|
| posted on 2/4/10 at 09:20 AM |
|
|
It depends which carbs you have IIRC, if the throttle linkage is in the middle there is an inlet between carbs 1 & 2, and 3 & 4, if the
linkage is on the end, its a single inlet in the middle.
There are two pipes higher up the carbs, between 1&2 and 3&4 these are vents to atmosphere or the airbox.
|
|
|
rich201283
|
| posted on 2/4/10 at 10:22 AM |
|
|
I have the carbs with the throttle linkage on the side not the middle.
|
|
|
blakep82
|
| posted on 2/4/10 at 11:26 AM |
|
|
my throttle linkage is in the middle, and i plugged my fuel into the one in the middle too, it worked, but fuel did seem to come out of everywhere,
and was a manky colour. will have to have another look. don't think i've got any other inlets
just had a look, between 1&2 and 3&4, i've just got straight connecting pipes (not Ts) and only a T in the middle
[Edited on 2/4/10 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
jacko
|
| posted on 2/4/10 at 02:08 PM |
|
|
If its in the middle there model E carbs 10mm pipe
b / c have two fuel pipes no return to tank
|
|
|
