Mal
|
| posted on 26/4/10 at 03:55 PM |
|
|
1.6 Zetec SE - Block Oil Pressure Holes
I want to know if the 1.6 Zetec SE Engine (the all aluminium one) has more than one tapped hole in the block, or head, to take a second oil pressure
connection.
I want to fit a VDO sender into one hole and the low oil lpressure light into the possible second one.
There is a second tapping on my Zetec E silvertop engine where I have done this.
The normal way round this requirement is use a t-piece, but there is not much room behind the standard plastic inlet manifold on the SE engine.
The best option is a VDO sender with 2 electrical connections on it. Since I already have a single connection sender I don't want to spend £45
on another one.
Any help appreciated.
Cheers,
Mal
|
|
|
|
|
beaver34
|
| posted on 26/4/10 at 04:08 PM |
|
|
as far as im aware ive only seen the one in mine, not my my engine case at the moment to look at though
|
|
|
mangogrooveworkshop
|
| posted on 26/4/10 at 05:02 PM |
|
|
They use a braided hose and mount a t on the end of that.
It protects the senders from vibration and gets round the space restrictions
|
|
|
