karlak
|
| posted on 11/7/10 at 04:32 PM |
|
|
Megajolt - Where did you put the Coil Pack ???
Got the car running on the basic EDIS and coil pack today - Starts a lot better 
Anyway, before I get the Megajolt fitted, I want to secure the EDIS and Coil Pack. Sorted the EDIS, but am struggling on a good position and a way of
fixing the Coil Pack.
Has anyone got any pictures of the way they attached it to a MK Indy type ? Just need a bit of inspiration really
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|
|
|
|
big_wasa
|
| posted on 11/7/10 at 04:34 PM |
|
|
What engine ?
|
|
|
karlak
|
| posted on 11/7/10 at 04:38 PM |
|
|
quote:
Originally posted by big_wasa
What engine ?
OOps, its a Pinto.. But, I guess any other engine setup ideas would be applicable as well.
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|
|
RichardK
|
| posted on 11/7/10 at 04:40 PM |
|
|
I put mine on the bulkhead but I have seen a couple on top of dizzy shaft on a bracket where the dizzy cap used to be, looked sweet.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
big_wasa
|
| posted on 11/7/10 at 04:59 PM |
|
|
Fiesta has a bracket that mounts to the block under the inlet manifold.
Out of the way.
|
|
|
rusty nuts
|
| posted on 11/7/10 at 05:38 PM |
|
|
Used the top bell housing bolts and a home made mounting plate
|
|
|
dave r
|
| posted on 11/7/10 at 06:55 PM |
|
|
i made a bracket for mine to fit ontop of the cut off dizzy
|
|
|
karlak
|
| posted on 11/7/10 at 07:27 PM |
|
|
Cheers Guys, Like the top of the Bellhousing bolt idea.
I have been messing about with a old distributor today as well. But am struggling getting the thing back together.. Is it normal for the
"shaft" to have a bit of play (up and down)..
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|
|
.jpg)
