jabs
|
| posted on 25/8/10 at 07:28 PM |
|
|
Cylinder Head Skimming
Anyone know the cheapest place to get a cylinder head skimmed in harrogate area (may have to go to leeds as not much industry in harrogate).
Cheers John
|
|
|
|
|
gavin174
|
| posted on 25/8/10 at 07:33 PM |
|
|
try asking marc at MNR
I am sure he will know someone local to you...
http://www.essexkitcarclub.com
|
|
|
RichardK
|
| posted on 25/8/10 at 07:39 PM |
|
|
There is a Ian Myres guys who rebuilds engines on the A59 towards York about a mile after the Skipbridge petrol station if you know it (just before
where they do the grasstracking) he used to do but not sure if retired) Came highly recommended to me from some classic car owners I know.
Just googled him and this is him LINKY
Or
maybe pop round to Fairdeal Motors on Manse Lane in Knaresborough and ask who they use, they are a good set of lads who I'm sure wont mind.
Where in Knaresborough are you m8?
Cheers
Rich
[Edited on 25/8/10 by RichardK]
Gallery updated 11/01/2011
|
|
|
fazerruss
|
| posted on 26/8/10 at 07:25 AM |
|
|
Lockside engineering in Castleford, cost about 25 quid last one I had done.
"if assholes could fly this place would be an airport"
|
|
|
jabs
|
| posted on 26/8/10 at 08:01 AM |
|
|
quote:
Originally posted by RichardK
maybe pop round to Fairdeal Motors on Manse Lane in Knaresborough and ask who they use, they are a good set of lads who I'm sure wont mind.
Where in Knaresborough are you m8?
Yep Fairdeal are ok as have used them for MOT's a few times. You know where I live Richard as awhile back you came around to look at my the
Haynes I was building. Had to give up on it as lost job etc. Manor road if you have forgotten
|
|
|
mad4x4
|
| posted on 26/8/10 at 09:36 AM |
|
|
Aberdeen Head Shop do Postal Service and are bout £80 to Skim and test.
Aberdeen Head Shop
6, Stell Rd, Aberdeen, Aberdeenshire AB11 5QR
* Tel: 01224 582014
[Edited on 26/808/10 by mad4x4]
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
RichardK
|
| posted on 26/8/10 at 09:45 AM |
|
|
quote:
Originally posted by jabs
quote:
Originally posted by RichardK
maybe pop round to Fairdeal Motors on Manse Lane in Knaresborough and ask who they use, they are a good set of lads who I'm sure wont mind.
Where in Knaresborough are you m8?
Yep Fairdeal are ok as have used them for MOT's a few times. You know where I live Richard as awhile back you came around to look at my the
Haynes I was building. Had to give up on it as lost job etc. Manor road if you have forgotten
Ahh, remember now, shame you had to drop it, you on with anything at the moment?
Take care
Rich
Gallery updated 11/01/2011
|
|
|
gazza285
|
| posted on 26/8/10 at 10:27 AM |
|
|
You could try Bradford Grinders, good service and cheap.
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|
|
